https://www.waterhydraulics.co.uk/wp-content/uploads/2019/10/Pumps-banner.jpg

The Janus axial piston motors are totally oil free, clean and completely safe to use. As a result of employing advanced materials, high velocity and loaded sliding surfaces, the range of motors can operate effectively with water as their only coolant/lubricant

This removes the potential for cross contamination of the system fluid or lubricating oil. Each motor employs technology which minimises vibration and ensures a low noise yet high efficiency operation. The result is an exceptionally small, light-weight product.

Manufactured in 316 stainless steel as standard, the product offers excellent resistance to corrosive fluids. The materials utilised internally can be selected to suit the most appropriate combinations for not just tap water but also sea water and various other fluids.

Minimal pulsation is experienced with these units due to the multiple piston design and the high operational speeds. The physical size of the motor in comparison to the power generated offers one of the most compact drive solutions.

Motors Configurator 

Unit Type

   Displacement (cc/rev )

Fluid

Shaft Seal


**M60 &M180 Only
Your Pump Ordering Code

Motors Configurator 

Unit Type
Displacement (cc/rev )
Fluid
Shaft Seal

**M60 &M180 Only
Your Pump Ordering Code

M3
M3
Displacement cc/rev 3.0
Max. RPM 4000
Max power 2.7 kw
M6
M6
Displacement cc/rev 4.6 – 6.0
Max. RPM 4000
Max power 5.4 kw
M15
M15
Displacement cc/rev 15.0 – 18.6
Max. RPM 4000
Max power 17.5 kw
M30
M30
Displacement cc/rev 30.0 – 34.6
Max. RPM 4000
Max power 31 kw
M60
M60
Displacement cc/rev 63.0 – 70.3
Max. RPM 4000
Max power 67 kw
M180
M180
Displacement cc/rev 135.0 – 225.0
Max. RPM 2000
Max power 120 kw