https://www.waterhydraulics.co.uk/wp-content/uploads/2019/10/green.jpg

Here are some of our full range of product accessories, click below to see the products individual pages with downloads and specifications.

PO Check
Bell Housings
A standard range of housings that connect the full pump range to IEC, B5 electric motor flanges.
Activation Card
Actuation Cards
Actuation cards must be used in conjunction with direct acting directional vales for minimum coil size and maximum force
Pressure Reducing Valves
Heat Exchangers
All stainless steel.
Contact The Water Hydraulics Company with application information.
Electronic Flow Control
Filters
1/4″ to 1 1/2″ BSP as standard.
Available in low pressure plastic or stainless steel, as well as high pressure stainless steel.
Standard filtration level 25 micro-meters (absolute) for tap water systems.
4/3 Directional Valve
Accumulators
A standard range of stainless steel accumulators are available on request.
4/2 3/2 Directional Valves
Tanks
Designed for mounting the pumps internally removing the need for suction hose protected by water level and temperature switches. The reservoirs are available in 316 stainless steel or plastic were appropriate.
PO Check
Bell Housings
A standard range of housings that connect the full pump range to IEC, B5 electric motor flanges.
Activation Card
Actuation Cards
Actuation cards must be used in conjunction with direct acting directional vales for minimum coil size and maximum force
Pressure Reducing Valves
Heat Exchangers
All stainless steel.
Contact The Water Hydraulics Company with application information.
Electronic Flow Control
Filters
1/4″ to 1 1/2″ BSP as standard.
Available in low pressure plastic or stainless steel, as well as high pressure stainless steel.
Standard filtration level 25 micro-meters (absolute) for tap water systems.
https://www.waterhydraulics.co.uk/wp-content/uploads/2019/10/accumulators-1-300x264.jpg
Accumulators
A standard range of stainless steel accumulators are available on request.
4/2 3/2 Directional Valves
Tanks
Designed for mounting the pumps internally removing the need for suction hose protected by water level and temperature switches. The reservoirs are available in 316 stainless steel or plastic were appropriate.