- Info
- Specification
- performance
- Downloads
Actuation by water, oil or compressed air pilot is possible on all configurations. The water version is also available with an integral DN3 solenoid operated pilot valve. |
Please note: adequate flow must be available to ensure the full travel of the valve is made.
Max Inlet Pressure
|
160 bar
|
Operating Pressure Range
|
0 to 100 bar
|
Flow Range
|
0-140 L/min
|
Flow Characteristics
|
CV Rate 5.0
Kv Rate 4.26 |
Feed Gallery Diameter
|
18mm
|
Porting
|
3/4” BSP (Parallel)
|
Construction Materials
|
A.I.S.I 316, Polymer &
Martensitic Stainless steel |
Pilot Media
|
Water, Air & Oil
|
Ext.Water Pilot
|
Oil Pilot
|
Air Pilot
|
||
|
201EJSW
|
201ELSW
|
201EFSW
|
|
|
208EJSW
|
208ELSW
|
208EFSW
|
|
|
203EJSW
|
203ELSW
|
203EFSW
|
PDF or Portable Document Files can be opened in many readers such as Chrome or Adobe PDF Reader.
STEP files can be used in many 3d packages, such as Solidworks, Autocad 3d or even Blender.
- Info
- Specification
- performance
- Downloads
Actuation by water, oil or compressed air pilot is possible on all configurations. The water version is also available with an integral DN3 solenoid operated pilot valve. |
Please note: adequate flow must be available to ensure the full travel of the valve is made.
Max Inlet Pressure
|
160 bar
|
Operating Pressure Range
|
0 to 100 bar
|
Flow Range
|
0-140 L/min
|
Flow Characteristics
|
CV Rate 5.0
Kv Rate 4.26 |
Feed Gallery Diameter
|
18mm
|
Porting
|
3/4” BSP (Parallel)
|
Construction Materials
|
A.I.S.I 316, Polymer &
Martensitic Stainless steel |
Pilot Media
|
Water, Air & Oil
|
Ext.Water Pilot
|
Oil Pilot
|
Air Pilot
|
||
|
201EJSW
|
201ELSW
|
201EFSW
|
|
|
208EJSW
|
208ELSW
|
208EFSW
|
|
|
203EJSW
|
203ELSW
|
203EFSW
|
PDF or Portable Document Files can be opened in many readers such as Chrome or Adobe PDF Reader.
STEP files can be used in many 3d packages, such as Solidworks, Autocad 3d or even Blender.
The pilot piston can be sized to vary the pilot actuation pressure between 2 and 80 bar. The external pilot actuator is designed to operate at a pressure of 40 bar, although alternatives can be offered on request. For oil pilot, the actuator is supplied with a dual seal and air vent design to prevent cross contamination of the fluids.
Return Options, The valves shown are all spring return however, the valves can be offered with a detent function and pilot return if preferred.
Functions,
4/3 with blocked P, AB&T joined at the centre
4/3 with open centre All ports joined at centre
4/2
3/2 N/O
3/2 N/C
The size of the pilot actuation can be modified to generate an actuation of different pilot pressure. For specific operating range contact TWHC. The DN16 is also available with an integral 3/2 solenoid operated pilot actuation valve.
Electrical Actuation, Due to actuation forces and stroke length a direct solenoid operation is not possible with this size of valve. However, stepper motor
control is under development.